The solid-state soft starter is composed of a control system composed of CPU as the management center and ASIC application-specific integrated circuit as the core, and electronic components such as thyristors (SCRs). The microprocessor sends "trigger" pulses to the trigger poles of six thyristors. In order to control the conduction angle of the thyristor, the output voltage and current of the thyristor are controlled by the phase angle of the "trigger" pulse. Therefore, the output voltage of the thyristor can be controlled by a microprocessor, and the output voltage of the thyristor can be slowly increased from zero to full voltage, so that the motor The speed is increased from zero to the rated speed to realize the soft start of the motor.

　　DGQ-c series motor soft starter product features:

　　◆The control system adopts a humanized design, with a friendly Chinese display man-machine interface and a variety of combined control operation modes, clear display, simple operation, and great convenience for users;

　　◆Using Harvard bus and integrated design to reduce system connections, DSP chip production process adopts SMT chip technology, and the whole machine has been subjected to high temperature aging and vibration experiments before leaving the factory to ensure reliable product quality;

　　◆With a variety of starting methods, the voltage ramp starting method can get the best output torque; the constant current starting method can limit the maximum starting current, but the starting time is slightly longer. The specific method can be selected according to the site conditions;

　　◆Has complete protection functions: twelve protections such as phase loss, starting overcurrent, running overload, underload, overheating and too long starting time; and has the function of saving power off and character prompting to find the cause of the fault;

　　◆ With free parking, soft parking and brake braking and other parking methods to choose from. The input and output control points can be programmed on-site according to the needs to meet the needs of different occasions;

　　◆The starting current multiple, starting time, starting voltage and other parameters can be adjusted according to different loads to reduce starting loss and achieve the best starting effect, smoothly starting the motor and dragging the load;

　　◆With RS-485 communication function and 0-20mA standard analog current output, the system and the host computer can carry out two-way communication to adapt to the monitoring of peripheral equipment;

　　◆It has the characteristics of reliable performance, easy installation, operation and use.